If you want to give your bathroom a facelift, you can consider DIY bathroom renovation. The main tasks involved are swapping out the shower and tub fixtures, installing new tile, and installing new cabinets. But if you’re not a super-do-it-yourself-er, you can always hire someone to do some of the work for you.
Installing new tile
Installing new tile as part of a DIY bathroom renovation doesn’t have to be difficult. First, remove all existing tile. Next, mix mortar. Be careful as the mortar is caustic and can burn your hands. It is recommended that you use a mortar drill mixer for this task. You should apply thin-set mortar in small sections.
Installing new flooring
Before you start installing new flooring in your bathroom, make sure to measure the space. You should also remove the old flooring and subfloor, which acts as the foundation beneath the new tile. This layer also serves as the final water protection barrier. Once the floor is level, install a pressure treated plywood underlayment using moisture resistant screws and glue. Next, install cement board over the underlayment.
Swapping out tub and shower fixtures
While swapping out tub and shower fixtures can save a considerable amount of money, you need to know what you are doing before you begin. While it can be fun to save money by tackling the project yourself, the risks of mistakes are also very high. After all, your bathroom is an important room in your home, and making mistakes can have disastrous consequences. So, it is always a good idea to trust professionals when it comes to bathroom renovation projects.
Installing new cabinets
If you are planning a DIY bathroom renovation, you will need a pair of hands to help with the installation process. If you are not confident in your DIY skills, you can hire a handyman or remodeling contractor to do the job for you. However, you must have enough patience and basic tools to ensure a successful renovation.
Hanging drywall
Before you begin hanging drywall for your bathroom renovation project, be sure to check the manufacturer’s instructions. Some brands may require you to use specialized tools. Protect areas that get wet with plastic sheeting or a moisture barrier. In addition, you may want to use a water-based urethane coating.
Cleaning up caulk
Cleaning up caulk is a major step in DIY bathroom renovations. Caulk is sticky, so it is crucial to follow instructions for caulking. Before applying caulk, make sure to wet a finger first. This will help remove any excess caulk and form a smooth, rounded bead. Once the caulk has cured, it is time to remove the tape and start filling in the remaining gaps.
Precautions for a good bathroom
If you’re planning to do a DIY bathroom renovation, you need to take certain precautions. These precautions are meant to protect your property from contamination, as well as your health. For example, you need to wear industry-grade respirators while cleaning. You should also wear protective gloves and eye covers.